Rovana Trade factory — Qalyub, Egypt
Cable trays and ladders, made in our own factory in Qalyub
Perforated trays, ladders, wire mesh and every fitting your layout needs — cut, punched, formed and hot-dip galvanized to your shop drawings, then delivered to site anywhere in Egypt.
- Factory founded
- 2019
- Projects supplied
- 250+
- Customers
- 1200+
- Certified quality system
- ISO 9001
Every cable support your project needs, from one factory
All products- Hot-dip galvanized perforated cable tray Our most specified tray: perforated steel, formed after cutting and hot-dip galvanized to BS EN ISO 1461 for outdoor, industrial and humid areas.
- Pre-galvanized cable tray Made from galvanized sheet for dry indoor areas such as offices, malls, hospitals and data rooms. Lighter on budget, clean finish.
- Powder coated (electrostatic painted) cable tray Electrostatic painted tray in the colour your project needs — for exposed runs where appearance matters or for colour-coding services.
- Stainless steel cable tray (304 / 316) For food, pharmaceutical, coastal, desalination and chemical plants where galvanized steel will not last.
- Cable ladder Two side rails joined by rungs, for heavy power cables over long spans in plants, substations and risers. Hot-dip galvanized as standard.
- Wire mesh cable tray Light, open mesh baskets for data, low-current and control cables. Fast to cut and bend on site.
- Cable trunking Closed steel trunking with a removable cover, protecting cables from dust, damage and tampering.
- EMT conduit and fittings Galvanized steel conduit with couplings, connectors and clamps for exposed wiring in commercial and industrial buildings.
- Cable tray accessories and supports Elbows, tees, crosses, reducers, risers, covers, splice plates, brackets, channels and hangers that match our trays and ladders.
- Strut channel (unistrut) sections Slotted galvanized steel C-section channel for building supports, hangers and frames for cable trays, conduit and equipment.
- Cable tray cantilever arms, floor brackets and hangers Galvanized wall cantilever arms, floor-mounted brackets, clamp hangers and anchor bolts for installing cable trays and ladders on walls, ceilings and floors.
From flat sheet to your site, under one roof
Every stage happens in our own plant, so we control dimensions, quality and lead time.
Cutting
Sheet cut to size from coil or plate.
Punching
Bottom and side perforations on our punching lines.
Forming
Side walls and return lips bent on the press brakes.
Galvanizing
Dipped in molten zinc to BS EN ISO 1461.
Inspection
Dimensions and zinc coating checked for every batch.
Delivery
Packed and delivered to site in any governorate, or for export.
Projects we have supplied
All projects
Companies we supply
Clients
Common questions
Do you make trays to custom sizes?
Yes. Widths, side heights, thickness and finish are produced to your drawings or BOQ. Send the cable schedule if you need us to propose sizes.
Hot-dip galvanized or pre-galvanized — which one do I need?
Use hot-dip galvanized tray outdoors, in plants and in humid or chemical areas, because the zinc covers cut edges and holes. Pre-galvanized tray suits dry indoor areas and costs less.
Which standards do your products meet?
Hot-dip galvanizing after fabrication to BS EN ISO 1461 and ASTM A123, pre-galvanized sheet to EN 10327, tray systems to NEMA VE 1-2009 and CO2 welding to AWS D1.1. Our factory quality system is certified to ISO 9001:2015, and we are on the approved vendor list of ACE Consulting Engineers (Moharram.Bakhoum).
Do you deliver outside Cairo?
We deliver to sites in every governorate in Egypt and pack orders for export.
How do I get a price?
Use the price calculator for an indicative price per meter, or send your BOQ through the quote form or WhatsApp and we reply with an official quotation.
Are your products certified?
Our factory is ISO 9001:2015 certified and our hot-dip galvanizing follows BS EN ISO 1461. Certificates are available on the certificates page and with every order on request.
Guides to help you specify
Technical guides- Cable Tray Fixing Accessories: Brackets, Hangers and Anchors Identify cable tray fixing accessories: brackets, hangers, strut, bases, anchors, clamps and guides, with a checklist for a complete support quotation.
- Cable Tray Sizing: Cable Layout and Spacing Size cable tray using cable diameters, layout and clear spacing. Includes a width calculation example, fill considerations, segregation and load checks.
- Steel Sheet Grades: Cold-Rolled vs Hot-Rolled, Strength and Quality Understand cold-rolled and hot-rolled sheet, steel grades, yield strength, tensile strength, hardness and material quality when specifying cable tray.
Send us your BOQ and get a quotation the same day
A bill of quantities, drawings or even a photo from site — our technical team reviews it and replies.