ROVANATRADE

Metal Cable Trunking in Egypt: Sizes, Finishes and Price per Metre

Metal cable trunking in Egypt: dimensions, thickness, covers and finishes, differences from cable tray and what to specify for supply and installation pricing.

Metal cable trunking is an enclosed cable-management channel with a removable cover. Rovana Trade manufactures and supplies metal trunking in Egypt, with project dimensions, finishes and fittings, and installation within an agreed scope.

Start your enquiry with dimensions, material, thickness, cover and fixing arrangement. This guide explains the information needed for a price-per-metre request or bill of quantities.

Cable trunking versus cable tray

Rovana's metal trunking is an enclosed channel with a cover that can be removed for cable access. Cable tray is specified by its system type, such as perforated or solid-bottom tray, with covers available for appropriate arrangements. Review section geometry, cover, joints and intended application rather than relying on the product name alone.

Trunking can be considered for wall routes, workshops, garages and panel rooms where an enclosed arrangement is required. Its suitability must be reviewed for the cables, environment and maintenance requirements.

Rovana cable trunking sizes

The published cable trunking product page lists:

ItemPublished information
Width50 to 600 mm
Height25 to 100 mm
Steel thickness1.0, 1.25, 1.5 and 2.0 mm
Section length3 metres
CoverRemovable, with detail specified in the request

Dimensions, finish and assembly details are reviewed for the proposal. A published range does not establish that every combination suits every load or is immediately available from stock.

An illustrative enquiry could state 100 mm wide × 50 mm high × 1.5 mm thick metal trunking, 3-metre sections, followed by material, finish, cover and quantity. This describes an item; actual size selection requires cable and design review.

Galvanized, painted and stainless options

Rovana lists pre-galvanized steel, hot-dip galvanizing, paint and stainless 304 among its product options. State the required system explicitly, especially where coating over galvanizing or a particular colour is specified.

Descriptions such as “white trunking” or “galvanized” may leave the substrate and finish unclear. See our coating and galvanizing comparison for related information.

Covers and joints form part of the system

Specify cover retention and removal arrangements, together with bends, tees, end caps and connections. Review access space where the route passes near ceilings, walls or other services.

A cover alone does not establish a water or dust protection rating. If the project requires an IP rating, request the specified system details and appropriate compliance evidence. As an example of how assembly details matter, Legrand's trunking guidance identifies joint-cover components needed for a particular rating in its own range. That rating does not transfer automatically to another product. See the Legrand metal trunking guide.

Choosing trunking dimensions

Send the cable schedule and dimensions, separation and future-capacity requirements, together with the route layout and special fittings. Review usable space, cable arrangement and access against project requirements. Physical fit alone is insufficient to establish suitability.

Identify internal partitions or special provisions in the drawings and BOQ for feasibility review. Our cable layout and sizing guide explains useful starting information, while the trunking system's own requirements must be applied.

Cable trunking price per metre in Egypt

Pricing depends on:

  • Width, height, thickness and material.
  • Galvanizing or coating system and required finish.
  • Covers, connections, bends, tees and end caps.
  • Quantity, delivery phases and destination.
  • Included supports, fixings and installation work.

Check whether a quotation is per metre or per 3-metre section and whether covers, accessories, VAT and delivery are included. A formal price requires specifications and quantities. Use a matching scope when comparing proposals.

Supply and installation from Rovana

Rovana Trade offers supply and installation within an agreed project scope. For execution pricing, provide installation heights, wall or ceiling details, supporting structure and access information alongside drawings, quantities and handover requirements.

Explore our supply and installation service and identify the required activities so that materials, supports, fixings and execution responsibilities are clear.

Request a metal trunking quotation

Send dimensions, thickness, material, finish, cover, quantities, special fittings, delivery location and required dates through the Rovana Trade contact page. Review our metal cable trunking product and best cable tray manufacturer in Egypt guide to explore the product and fabrication scope before ordering.

Was this article helpful?

Your feedback helps us improve our explanations and information.

Choose your answer

Comments are for internal review and are not public. Maximum 1,000 characters; please avoid personal information.

Send us your BOQ and get a quotation the same day

A bill of quantities, drawings or even a photo from site — our technical team reviews it and replies.

Chat on WhatsApp