Lighting Poles in Egypt: Types, Heights and Selection Guide
Choose lighting poles by height, shape, luminaires, wind exposure, arms, base plates, anchor bolts and finish. A practical quotation checklist for Egypt.
Choose a lighting pole using the site, luminaire, wind exposure and mounting arrangement—not height and wall thickness alone. Two poles of equal height may have different shafts, arms, base plates and anchorage, with different suitability and supply costs.
This guide helps prepare an enquiry for streets, parking areas, gardens and industrial sites without confusing a product description with an approved design.
Lighting pole types
| Type | Description | Details to specify |
|---|---|---|
| Tapered pole | Section dimensions reduce gradually towards the top | Height, bottom and top dimensions, thickness |
| Stepped pole | Dimensions change between distinct shaft sections | Section lengths, dimensions and connection details |
| Decorative pole | Architectural form for paths, gardens or plazas | Appearance, light positions, access and finish |
| Bollard or short garden post | Lower-level fitting for a defined lighting application | Optical arrangement, mounting and environmental protection |
Round, hexagonal, octagonal or square describes the cross-section. Tapered or stepped describes the change along the shaft. A tapered pole can therefore be round or polygonal. The style alone does not establish its load rating.
How high should a lighting pole be?
Rovana Trade lists lighting poles from 3 to 9 m. Select the height through the lighting and structural design for the site. Clearly distinguish overall pole length from luminaire mounting height and define the measurement reference, particularly with arms or embedded sections.
Pole spacing and quantity depend on the photometric layout, site dimensions, required illumination, uniformity and glare control. Luminaire wattage alone cannot determine pole height or spacing. Raising the pole to reduce quantities requires reviewing both light distribution and structural effects.
Single arms, double arms and Y arrangements
Specify arm quantity, projection, angle, direction and the luminaire mounting interface. Changing from one to two luminaires can alter the loading; do not reuse a previous pole and base detail simply because the height is unchanged.
Declare cameras, signs, banners or solar panels in the original enquiry. They are additional design inputs, rather than accessories that can automatically be added after supply.
Why luminaire weight is not enough
Fixtures and arms present area to the wind as well as adding weight. Review effective projected area, or EPA, where used in the product data, together with the applicable site and design conditions. A broad fixture and a compact fixture of the same weight are not necessarily interchangeable loads.
Acuity Brands’ pole guidance explains the importance of including mounted equipment in the wind-loading assessment. Shaft material, dimensions, openings, welds, base plate and anchorage also require review.
Base plate, anchor bolts and concrete foundation
- Base plate: the plate attached to the bottom of the pole, with fixing holes defined by the design.
- Anchor bolts: the specified anchorage connecting the pole base to the foundation, with the required nuts, washers and template.
- Concrete foundation: the civil foundation designed for the site, loads and ground conditions; it is separate from the pole’s steel plate.
Pole height alone does not size the foundation or bolts. Before concrete work, coordinate bolt positions, plate geometry, access-door and arm orientation, levels and cable entries against approved drawings. State whether bolts and the template must arrive before the poles. Unapproved site alterations are not a substitute for coordinating these details.
Galvanized, powder-coated or a combined system?
Specify protection for the actual exposure and appearance requirements. Colour alone does not identify the substrate or corrosion protection beneath it. Define the coating specification and inspection scope; for paint over zinc, include compatible surface preparation and the coating system.
Aggressive or coastal exposure and the ground/foundation interface may require specific protection details. The powder coating over galvanizing guide explains the general principle; a lighting pole must follow its own specified details.
Access and electrical scope
Define the access door, closure, cable entries, earthing connection and required internal equipment. Clarify whether the quotation includes the shaft alone or also arms, luminaires, connection equipment, electrical protection and cables. Access openings form part of the pole design and should not be arbitrarily enlarged after manufacture.
What determines lighting pole price?
Height, shaft geometry, wall thickness, material grade, fabrication, arms, plate details, anchors, finish, quantity and transport all affect the price. “6 m galvanized pole” is not a complete like-for-like specification.
Compare the same approved drawings and supply scope, including VAT, validity, delivery date and whether installation, concrete foundations and luminaires are included.
Quotation checklist
- Site, use, quantities and delivery programme.
- Height reference, shape and approved drawings.
- Specified material, thickness, dimensions and wind design basis.
- Luminaire model, quantity, weight, mounting and available wind-area data.
- Arm projection, angles, directions and all additional equipment.
- Base plate, anchors, template and foundation interfaces.
- Finish, colour, inspection and required certificates.
- Access, earthing and electrical, transport and installation scope.
An enquiry example, not a design: “Supply 6 m octagonal tapered lighting poles with one arm, galvanized after fabrication, including base plates, anchor bolts, nuts and washers to approved drawings and calculations; luminaire data, site and quantities attached.” Complete the structural dimensions from the approved design rather than guessing them.
Lighting poles from Rovana Trade
Rovana Trade lists street, decorative and garden lighting poles with different shapes, arms and finishes against project drawings. View the lighting pole range and send the BOQ, drawings and luminaire data for an itemised supply quotation. The factory is in Qalyub, Egypt.
Technical references
- BSI EN 40 series: definitions, design verification and material requirements in the applicable parts. Referencing it is not a product conformity certificate.
- Valmont general recommendations: declare the site and attached equipment before selection.
- HEA/ILP protection guidance: consider above- and below-ground exposure when selecting protection.
Was this article helpful?
Your feedback helps us improve our explanations and information.